-
Hello,
i have compiled and installed knx on a raspberry pi 1 with a Gira 108000 plugged in.
my daemon runs as follows:
/usr/bin/knxd -f1 -t3 -e 1.1.5 -E 7.0.1:20 -R -T -D -S -b usb:
Very often…
-
Hello,
if I see it correctly, this code is duplicate:
https://github.com/knxd/knxd/blob/e52661d00a34640aa35d7036895aa79a6d1d215b/src/client/c/dptconvert.c#L156
https://github.com/knxd/knxd/blob…
-
I am currently working with Tasmota KNX and I would like to ask how can I get the KNX parameters from the device? Are there any functions similar to those on Sonoff.php which I must use to get the c…
-
i am using homebridge with homebridge knx and knxd to communicate to homebridge and knx ip device mdt SCN-IP000.01. it works good when sending one command at a time but doesn't work well when trying w…
-
这是这个USB设备 不支持吗?
```信息: Found 1 KNX USB devices:
|--Bus 1 Device 9: ID 0403:6898 TSY Technology TSY KNX-USB Data Interface S/N 6989BB910B31
| Attached at port 1 (bus:1/1/1)
| Full Speed USB
…
-
I'm using knxd with configuration like this:
```
knxd -t 0xfffe -e 0.0.1 -E 0.0.2:8 -D -T -R -S -b ipt:192.168.4.202:3671
```
It connects to my Gira X1 IP interface - and prints out datagrams…
-
Hat jemand schon ein Maico KWL in ioBroker angebunden? Zugriff ist über Webserver (lokal) möglich.
-
Hello,
I have get the github code, like in the documantation described. I've got much error on building the apps in the Visual Studio.
What do I have made wrong? Thanks in Advance...
**Here my …
-
Hello, first of all apologies for my bad english.
I have an ABB USB/S1.2 USB device.
I installed KNXd on HomeAssistant. I made the necessary configurations, but unfortunately I cannot establish kn…
-
I have build a house and started looking for a home automation system that has several features:
- it is not wireless. I have so much issues with wireless systems that I simply do not trust them. Th…