-
### The problem
If no name has been assigned to the “Cover”, it should be given a generic name.
However, the entity is named identically to the device
This configuration
![image](https://github.…
-
Hi,
I did a search to find a thermostat with humidity sensor and the only device I found was PTC20 by POER: https://de.aliexpress.com/item/4000044931140.html
I first tried to find a way to integ…
-
I'm using knxd with configuration like this:
```
knxd -t 0xfffe -e 0.0.1 -E 0.0.2:8 -D -T -R -S -b ipt:192.168.4.202:3671
```
It connects to my Gira X1 IP interface - and prints out datagrams…
-
Hello,
With v1.0.4-B55, I have an error ! Here is the startup log ! Do you have a solution please ?
Control = Failing
Status = OK
Thank you very much for the work.
9/12/2023, 12:20:27 PM] R…
-
Sometimes KNX devices don't switch although the regarding event happens. OH doesn't handle the missing state change.
My observation:
## Expected Behavior
The normal behavior is, that in the ev…
-
KNXd used to support a function, where a preconfigured list of group addresses was queried sequentially after a generic http request. This was extremely helpful to synchronize the miniserver KNX funct…
-
-
* Subject: Daten per IP-Telegramm an Gira Homeserver schicken
* Wiki-Page: home
* From: dosordie
* Date: Tue, 24 Feb 2015 18:50:42 UT
* Message-ID:
Hallo,
plane gerade meine 200 KW2 mit vcontrold (…
-
hi there,
I try to switch with the knxd several devices at the same time. So to build something like a main switch. The problem is that I have a turn-on delay of about 40 seconds with the on but al…
-
I am experiencing some unwanted behaviour, making me distrust the homebridge.
I have logic and sensors running on my KNX system changing light settings, temperatures etc. at different times of the da…