-
Hello, when I import an SVG file into VisiCut, I would like it to automatically position itself at X = 0 and Y = 0 on the work surface. The settings are correctly configured in the options but the fil…
-
Igami updated
3 years ago
-
Some Ruida controlled devices have their bottom on the top right corner instead of the more traditional left side. VisiCut already supports the top and bottom left, but lacks support for the other cor…
-
As mentioned in t-oster/VisiCut#577 there is some need for realtime and out of sequence operations. Since you first and foremost this would require backend support first especially with hooks for the …
-
hello, i can't find a forum to ask my question so i put it here.
im thinking about implementing the PandaPi 2.9 for my lasercutter because my SKR board with a 32bit proccesor can't handle the amoun…
-
I just wrote a driver. And somethings were annoying and wasted my time. Everything really should be setup to help driver authors. You basically need to hit a trifecta of has that particular model of l…
-
99% of our profiles are: Cut: focus d/2 (middle of material), engrave focus 0 (on the top)
Is there some idea to make this easier?
I am still looking for a solution, but already wanted to share my tho…
mgmax updated
6 months ago
-
Hi,
Currently Visicut allows speed to be input as a percentage of the maximum cutting speed as set in the laser cutter preferences.
I think it would be more useful to allow speed to be entered in ab…
-
Two things:
1: I am stuck with the Leetro support. No no, I know what I am doing, but I simply do not have the time. I found out a lot more about the format, and I think I could reliably generate wor…
-
Hi,
to reduce the data that needs to be streamed to something like a GRBL controller ober a serial or virtual serial port, it makes sense to reduce the number of after comma positions.
Currently, …