-
**Waveshare 13,3" error at new cycle**
The epd displays the modules at the first start, but it doesn't refresh, and when starts a new cycle it stops with error.
(venv) inky@inkycal:~/Inkycal …
-
This worked fine for me for several years, but now - after a fresh installation of BOOKWORM, it fail.
The Shutdown-Functionality does not work any longer. I made a fresh Bookworm installation from s…
-
Hello,
I am using a RPI 4, with [this](https://www.amazon.com/dp/B07Z25LWTS) display. Following the instructions [here](https://www.waveshare.com/wiki/7.5inch_e-Paper_HAT_Manual#Working_With_Raspbe…
-
So, I know it's not going to work, but is there any development toward getting it working on the Pi5 (yes absolute overkill) and PiOS Bookworm, I can see some talk but not sure which branch you are us…
-
## Version of the custom_component
0.0.5
## Configuration
```yaml
...
argon40:
...
```
## Describe the bug
After updating to [HomeAssistant OS 12.3](https://github.com/home-assist…
-
I'm running these scripts on a RPi4, on Raspbian Bookworm.
I was investigating why the power button didn't seem to shut down and ran into this little issue:
```Aug 09 14:26:42 eon systemd[1]: St…
-
**Describe the bug**
Accessing the GPIO functionality on a Raspberry Pi4 is hindered by some special behaviour, that seems to be NixOS specific: `/proc/cpuinfo` is missing the hardware revision, and …
-
Dependency on RPi.GPIO is a problem because RPi.GPIO does not support RPi5 and has problems with recent kernels. The temporary solution is of course to install [lgpio](https://abyz.me.uk/lg/py_lgpio.h…
Pako2 updated
1 month ago
-
I have waveshare V2 e-paper and when I run the python test file I get an error:
```
pi@jayofelony:~/e-Paper/RaspberryPi_JetsonNano/python/examples $ python3 epd_2in13_V2_test.py
Traceback (most …
-
I'm of the opinion that all but SPIDEV should be phased out.
- MRAA isn't well maintained since Intel passed it on to the eclipse github org; contributions don't seem to be well verified/tested. And …