-
Currently, the RX Multiplexer is placed before the IQ correction module in the FPGA design. This has two drawbacks:
- A custom FPGA application working on the IQ samples would probably want to use th…
-
hello
I'm using bladeRF-cli and i'm trying to set the bladeRF sample rate to 61.44M in both RX channels.
I'm executing the following script
`set frequency rx1 2.45G
set frequency rx2 2.45G
…
-
I have been trying to get time synchronized output from 2x BladeRF 2.0 micros xA4 using trigger functionality but there is a random delay in samples between both streams. My setup is as follows:
I …
-
Hello,
Is there any plans to separate libsddc from the ExtIO?
Not only would this make the code much cleaner with clean separation between the device library and the ExtIO interface,
but it would…
-
The installer for release 2023.02 (https://github.com/Nuand/bladeRF/releases/tag/2023.02) cannot yet be downloaded at https://www.nuand.com/win_installers/
-
I have gnuradio 3.10.1.1-2. make results in errors:
```
[ 46%] Building CXX object lib/CMakeFiles/gnuradio-osmosdr.dir/rtl_tcp/rtl_tcp_source_c.cc.o
[ 48%] Building CXX object lib/CMakeFiles/gnur…
-
Hi,
I have a BladeRF and I try to use qspectrumanalyzer with it.
SoapySDRUtil is working fine (picture 1). bladeRF-cli is working fine.
But not soapy_power (picture 2). soapy_power --device…
-
[chown@mbp ~/Downloads/gps-sdr-sim (master *)]$ bladeRF-cli -l hostedxA9-latest.rbf
Loading fpga...
Successfully loaded FPGA bitstream!
[chown@mbp ~/Downloads/gps-sdr-sim (master *)]$ bladeRF-cli -…
-
Hello!
I'm having issues using the BladeRF-A4 to decode ADSB messages. Everything seems okay on the command line (I get no errors), however no messages are ever decoded. I know that the antenna I…
-
I have been trying to BladeRF x115 work with SDRSharp without any luck. I tried with both a windows7 and a windows 10 machine but couldn't get it to work. I followed the following youtube link first.
…