-
(Hi! đź‘‹ Thanks for reporting an issue! Please make sure you click the link above to view the issue guidelines, then fill out the blanks below.)
## What are the steps to reproduce this issue?
1. St…
-
## What are the steps to reproduce this issue?
1. Install Dietpi arm64 on Raspberry Pi 3
2. Log in remotely from SSH remote in VScode
3. Install Pymakr in the remote host
4. See the error
## Wh…
-
board : LOPY 4
REPL output :
rst:0xc (SW_CPU_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, …
-
I have observed this with a LoPy running 1.8.0b1.
For ADR to perform correctly with deep sleep, the AdrAckCounter value must be saved in order for the device to decrease its data rates.
Simil…
-
You have all been very naughty!
Look at the following Christmas bug Santa has brought…
The problem concerns the [builtin function `round()`](http://docs.micropython.org/en/latest/pyboard/library/b…
-
## What are the steps to reproduce this issue?
1. Have a lopy4 with a Pysense 2.0
2. Use pycoproc_2.py as lib
3. Call `py.get_wake_reason()`
## What happens?
```
AttributeError: 'Pycoproc' ob…
-
I did a little research on this... the main thing seems to be if you had a reliable clock (RTC) and a known last good position. You could use PMTK 740 and PMTK 741 to inject time and position and impr…
-
Hi,
I have a Lopy4 on an expansion board v3.1.
Up to yesterday, I used it connected to my PC.
Yesterday, I plugged a smartphone external battery instead of the PC, to run it oudoor.
Since…
-
I am using a Pycom FiPy (firmware 1.20.0.rc13) and a Pytrack base.
After executing `wlan = WLAN(mode=WLAN.STA)`, `wlan.scan()` results in:
```
Traceback (most recent call last):
File "", line …
ahepp updated
3 years ago
-
ESP32 BLE version[ v0.4.16](https://github.com/nkolban/ESP32_BLE_Arduino/tree/7951347ed68313d75c367e1f2cce763cb56d1eb2)
last ESP32 arduino [env](https://github.com/espressif/arduino-esp32/tree/a835bb…