-
From a discussion with @joedrago:
> a minor note about SRGB's transfer function. SRGB's transfer function approximates much closer to a gamma of 2.2, despite the value of 2.4 being present in the onl…
-
Currently, frame luminance is calculated using downsampling with bilinear filtration, that basically calculates _average_ frame luminance. Average luminance works quite bad in HDR, because a single br…
-
Just a quick idea: would it be possible to use a contrast-based mask for modulating the luminance denoise amount, similarly to what is done for sharpening and dual demosaicing? For example, it could c…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Is your issue described in the documentation?
- [X] I have read the documentation
### Is your issue present i…
-
Basically more of a security sort of thing where on the forums the hyperlinks can be hidden by the hex colours #FFFFFF/#2C3034 (and anything within the Saturation/Luminance field).
Should specify e…
-
🙏
-
@LuminanceHDR/collaborators
So it's out, eventually!!!
Thanks to everybody for your help.
-
Cant find a reason but my two IS140 is not responding/sending data all the time.
attaching a printout from Homey, printout is for luminance but result for Motion alarm is similar.
Pink = IS140 n…
-
Firstly, a BIG thank you for your work.
I have a NEC APCIII with a 9 pin DB output. It is wired as a 9 Pin NEC type output. My Acorn 3000 has the same output.
the NEC has a V-freq of 56.4Hz and…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Is your issue described in the documentation?
- [X] I have read the documentation
### Is your issue p…