-
Hi,
my tempsensors always show 109% of battery which in my eys can't be correct value here, or?
`msg : Object
object
payload: object
battery: 109
temperature: 20.9
humidity: 51
address: "a4…
-
Thanks for this great initiative, if this project will work, it will save tons of time for Xiaomi tinkerers worldwide.
I tried to use your code to get a working bind_key for my LYWSD03MMC. Changed …
-
Есть ли какая то доп. информация? Знаю, что можно читать с помощью Веб-интерфеса. Есть ли другие способы? Хотелось бы с помощью Linux утилит, например **gatttool** и python.
-
[] I've read the [Troubleshooting Wiki](https://github.com/zewelor/bt-mqtt-gateway/wiki/Troubleshooting), my problem is not described there and I am already using the specified minimum bluez version.…
-
Recently got some new LYWSD03MMC and after flashing, It shows the last 3 bytes of the mac address after booting, then it shows 129.9C / 99% humdity. I can still connect to it and set the face to be s…
-
This library connect to the device and fetch the temperature/humidity.
That is apparently power hungry and not the most efficient way of doing things.
Custom Firmware for the lywsd03mmc and usage …
-
On Homey Pro (2019) the sensors (round) LYWSD03MMC worked perfectly with the original firmware with the app that I will attach. Unfortunately, this app does not install on Homey Pro 2013. I hope you w…
-
Hi
Just a simple question.
Is it possible to hide bluetooth device name ?? Something similar than wifi AP hide setting.
I mean, once I have detected and configured on ESPHome and/or Home assistant…
-
This error right after starting to interview.
2024-02-01 17:48:00Failed to configure '0xa4c1388366104b9b', attempt 2 (Error: Bind 0xa4c1388366104b9b/1 msTemperatureMeasurement from '0x00212effff0…
-
Tryin to update from 3.2 to 4.7
and i am receiving
Status: Update error: NotSupportedError: GATT Error Unknown.
10:13:23 PM: Hardware Revision String: B1.4
10:13:23 PM: Software Revision Strin…