-
setecl "Rootfs and all deb packages"
```
[ o.k. ] Using config file [ /home/evler/allwinner/mangopi/quad/Allwinner-H616-master/userpatches/config-build.conf ]
[ o.k. ] Preparing [ host ]
[ o.k. ] …
-
I work at MangoPI with H616 processor. I installed there debian (11.6 version).
```sh
orangepi@orangepizero2:/etc$ sudo i2cdetect -l
i2c-1 i2c DesignWare HDMI …
-
64-bit RISC-V is becoming more common now and Nerves supports it on the MangoPi MQ-Pro. This board is not that hard to buy and similar boards are being sold. Supporting a RISC-V target allows [Bumbleb…
-
##### System information (version)
- OpenCV =>4.5.3
- Operating System / Platform => T-head's Xuantie-906 CPU
- Compiler =>risc-v
##### Detailed description
I build OpenCV for T-head's …
-
Hi @szemzoa
I am trying to boot your kernel using U-Boot on MangoPi MQ-R (T113-S3), but without much luck:
```
U-Boot 2018.05 (Nov 06 2022 - 16:25:11 +0000) Allwinner Technology
CPU: Allwinn…
-
So far, I could run Tina Linux which is from the [RELEASE](https://github.com/YuzukiHD/YuzukiChameleon/releases) page.
Though it is said to support Tina Linux, Ubuntu, and Android TV firmware,
the…
-
Encounter a link error, please help solve, thank you~
### Info
cross compile: gcc version 7.5.0
host compile: gcc version 7.5.0
### Setp
- gcc mksunxi.c -o mksunxi
- change STRIP CC SIZE and…
-
Installed following the instructions in the README.md, and building a RPI image with `mix firmware` works, however if I try to build a mangopi pro image, this is the result:
```
aseigo@serenity:~/…
-
[Copied from @amclain's report on slack]
> The plot thickens. On a RPI0 for "CQ CQ CQ DE W1AW W1AW K", at 10 WPM it only sends the -. of the K. At 20 WPM it doesn't send the K at all.
>
> On the…
-
* Tested on x86 Ubuntu 20.04
An exception https://github.com/llvm/llvm-project/blob/de9d80c1c579e39cc658a508f1d4ba1cd792e4d5/llvm/lib/ExecutionEngine/RuntimeDyld/RuntimeDyldELF.cpp#L1076 appears wh…