-
Hello, I found a small mistake in the library guide.
For `enum eMCP251XFD_CANCtrlFlags` (page 48) :
It is written `MCP251XFD_CAN_PROTOCOL_EXEPT_ENTER_INTEGRA` instead of `MCP251XFD_CAN_PROTOCOL…
-
Hello ,
I am using RPi 3 with Raspbian distribution ,socketCAN driver and PICAN2 board connected to a Motor control board .
I set the can0 up by this command :
sudo /sbin/ip link set can0 up ty…
-
Hi,
My setup is made of the following components:
- A RPI with Ubuntu 20.04 Server installed on it and the Seedstudio CAN hat mounted on it (successfully tested and validated)
- An Arduino Nano Io…
-
Hi there,
I just installed the driver on the Jetson nano following the documentation [here](https://wiki.seeedstudio.com/2-Channel-CAN-BUS-FD-Shield-for-Raspberry-Pi/#using-can-bus-shiled-with-jet…
-
Hi,
there is now support for seeed-can-fd-hat in regular raspberry pi kernel.
https://github.com/raspberrypi/linux/pull/4034
Please update your [readme.md](https://github.com/Seeed-Studio/se…
-
I have a couple of questions regarding the `jtsn-mcp25xx` branch.
1) is it to the point that I can do some tests with it?
2) does the mcp driver have a dependency on the spi-tegra114p driver?
I…
-
**Describe the bug**
I am trying to test Seeed 2 Channel Shield with RPI4. I installed CAN-HAT as follow:
```
$ git clone https://github.com/Seeed-Studio/seeed-linux-dtoverlays
$ cd seeed-linux-…
-
I'm trying to add CAN FD to my ESP32 project with a Mikroe MCP2518FD CLICK. I am running the LoopBackDemoESP32 example. My only changes were the pin numbers and the oscillator frequency.
**#define…
-
@marckleinebudde I have tested MCP2517FD and there is no problem. But there is something wrong with MCP2518FD. If you are willing to discuss this, I can provide you with any other information.
```
…
-
**Describe the bug**
A clear and concise description of what the bug is.
When running make for stm32mp1 (Odyssey STM32MP157C) get error "No such file"
**To Reproduce**
1. Steps to reproduce…