-
The content of yaml file:
```
name: H3C
priority: 3
nuclei_tags:
- []
fingerprint:
- path: /
request_method: get
request_headers: {}
request_data: ''
status_code: 0
…
-
What is "cloned STM32 Chips"?
From README:
| Device | DC | QC | PD | EPR | BLE | Battery | Recommended |
| :--------: | :-: | :-: | :-: | :-: | :-: | :-----: | :---------: |
| MHP30 …
-
### 测试目标
http://220.174.209.176:10000/
### 指纹的Yaml规则
```yaml
name: h3c-router
priority: 3
nuclei_tags:
- []
fingerprint:
- path: /
request_method: get
request_headers: {}
…
-
I noticed by viewing the waveform of SPI communications and verifying with my other Logic Analyser that the configuration of MSB/LSB in the SPI decoder are reversed.
MSB should be LSB and LSB should …
-
# TLDR
UPDATE 2: This message has been started just as a pull request but it turned into very deep rabbit hole for me. But I would like to keep the original part as is.
TL;DR: by the "price" o…
-
**The bug description**
After flashing v2.16 on TS100 with DFU 3.48 the iron becomes a brick.
**To Reproduce**
1. Take brand new TS100 with DFU 3.48
2. Download TS100.zip file from [the v2.16 re…
-
Just an FYI in case you experience something like these odd failures to flash......
Attempting to update my TS100 clone Sequre SQ-001 to 2.20 IronOS (it has always worked before on the SQ-001) fai…
-
Why TS80 isn't "recommended"?
-
I was getting an error on my iron saying "low-vol" and I updated to version 2.19 and now the iron heats up extremely slowly, not even reaching 300C, before saying "thermal runaway" and cooling down.
…
-
Currently thinking that adding support to this code base for other soldering irons in the future feels highly likely to occur. (#634)
As well as ts100 being a bit odd since the TS80 is also support…