-
This is not a bug in this library, but within the micropython project - and rather a FYI in case others experience the same issue.
When trying to use the mp_modbus lib with the current release / mast…
-
Hello,
when i create multiple device's as ModbusRTU and want to use the same serial port, it does not work.
That make sense as it try's to open a new connection to the serial port.
But i habe a…
T1bbY updated
6 months ago
-
Hi
I am trying to make this work on esp32. There are some fork version for esp32 but no one works, at least for esp32 dev board.
Would it be so complicated to adapt this to esp8266/esp32?
I think …
maufc updated
1 month ago
-
Hi raenji-sk,
does your flow work actually with your setup?
Trying to find a SmartMeter Emulator / Gateway to use my SMD72 instead of the SDM630 for my X1-Mini
Got Homeassistant working alrea…
-
I use the lib to communicate with a Modbus RTU Device over an Modbus TCP to RTU Gateway.
When the Gateway is connected, but not the device (UnitIdentifier), I get no error on modbusClient.Connect()…
-
I made a configuration file for an INVT110XG with LSW5 logger.
It works and logs 91 entities to Home assistant.
I attached the yaml file as zip file. and the manual and modbus address list. If som…
-
## libmodbus version
f1eb4bc7ccb09cd8d19ab641ee37637f8c34d16d
## Description
Example:
```
EXAMPLE
-------
.Enable the RTS mode with positive polarity
[source,c]
-------------------
…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
```
I am using a Trio Motion controller, connected via USB for programing and
with serial / Modbus for data transfer to run a custom application.
What steps will reproduce the problem?
1. try to wr…
-
I pluged a waveshare usb->RS485 dongle and the port appeared is /dev/ttyACM0. I used the comand:
sudo mbpoll -a 255 -b 9600 -d 8 -s 1 -P none -t 3 -r 1 -c 2 /dev/ttyACM0
And I got:
mbpoll: modbus-r…