-
Current code use address 254 (0xFE) for communication. That address is a default MODBUS address only meant to used for test and should not be used in a MODBUS system since multiple units may respond t…
-
Hi I would like to have a button to switch off in total the Deye inverter, I believe modbus register 80 makes this possible ?
How do I add this to the yaml ?
-
Hi, this may be off topic, but out of all your inverter integrations, this one is the most similar for the srne inverter, and some settings works better compared to the pdf protocol doc. I was able to…
-
I'd noticed that I'd always end up with a spindle alarm when stopping a running g-code program in my usual sender (CNCjs).
Digging a bit further, I see that it's sending a soft-reset when the 'sto…
-
This test failed in: https://github.com/openhab/openhab-addons/actions/runs/6377170852/job/17305335904
```
TEST org.openhab.binding.modbus.tests.ModbusDataHandlerTest#testReadValueTypeIllegal()
-
**Is your feature request related to a problem? Please describe.**
I've added my S6 string inverter in the title to Home Assistant using the integration and the S2-WT datalogger. The device is create…
-
### The problem
I have a ESP32WROOM32UE connected to rs485. But it does not wake up from deep sleep.
I am using the rx and tx pins to communicate to rs485.
I also have a voltage divider conne…
-
Hi,
i'm using the modbus-cli which uses uModbus.
When i'm doing a query for some registers, modbus-cli is grouping this registers and i need perhaps 3 modbus requests. This 3 requests will be pu…
-
**Description**
When using FUXA with Modbus devices, data cannot be received by FUXA. This was tested for two different devices, resulting in _readMemory CRC errors for one, and both CRC errors and …
-
Hello!
When i use esp8266 always get a problem with loop upgrade
HARDWARE: ESP8266 80MHz, 80KB RAM, 4MB Flash
Dependency Graph
|-- ESPAsyncTCP-esphome @ 2.0.0
|-- ESP8266WiFi @ 1.0
|-- ESP8266mD…