-
Hi,
On Ubuntu 22.04 (Python 3.10) I'm trying to install and run modpoll. The installation works, but the command doesn't start:
```
ilko@msibox:~/work/modpoll$ pip install modpoll
Defaulting to …
-
Ciao Alex,
ho scaricato la tua integrazione per provare ad integrare l'inverter in oggetto, ma non ci riesco...ti chiedo cortesemente supporto.
Il modello è nell'oggetto: Questo il log che ho scaric…
-
We have the modbus spec now:
Fault codes, min/max doc, max charge/discharge current we don't map the holding registers for.
-
Hello,
your examples show polling of coils with 8 or 16 bits (i.e. aligned to full bytes length):
```
poll,coil,1,16,BE_BE
ref,coil1-8,1,bool,rw,
ref,coil9-16,2,bool,rw,
```
Because our dev…
-
Hello Shaodong,
I'm using `modpoll` for some time on a 24x7 server and have an issue, that after about 3 days of continues readings and if the modbus PLC fails communication for more than about 10 ti…
-
### Describe the bug
From time to time the integrtion stops. All data freez wont get updated. There is no any real error in logs. Integration just hangs... To make it work even reboot of HA wont help…
-
I think it would a benefit to add `ip addr` and `port` to __device line__ in config file (.csv)
example: __sm101.csv__
```csv
device,QE2.2,21,192.168.50.68,502
poll,holding_register,50514,60…
-
Hi,
I'm using a master simulator, I have created some registries and I'm trying to read the value using the example documented in the home page of this project.
I'm trying to read a registry to t…
-
On using mopoll with Hager SM101C and apply factor the output should be rounded
Many thanks for you work. Very useful
__config csv__
```csv
device,sm101c,21,,,
poll,holding_register,50514,60,BE…
-
Hi newbie here, working with esp-idf 4.2.2
I am working on MODBUS Serial example of esp-idf,I simply just connected the hardware as shown in the example.
ESP32-1(Master) and ESP32-2(Slave) by us…