-
I am having a lot of troubles using the MT7610E as STA. Currently I am testing these two devices using the latest code in master:
- TP-LINK TL-WR902AC (MT7628 + MT7610E)
- ASUS RT-AC51U (MT7620 + …
-
TP-Link Archer MR-200 V4 Mediatek - MT7628DAN RAM-64 MB Flash-8 MB CPU-580 MHz .
git clone https://github.com/openwrt/openwrt.git ...........
Target System Mediatek Ralink MIPS
Subtarget MT7628 bas…
-
Hi,
I’m experiencing an issue with the Omega 2+ board.
When I set the default gateway on apcli0, it automatically gets removed from the interface.
I did some debugging myself, to my knowledge t…
-
just speedtest or much client connect to ap
kernel 5.15.127 x86/64
Fri Nov 10 04:11:31 2023 daemon.info hostapd: phy1-ap0: STA 72:bd:41:7c:12:7d IEEE 802.11: authenticated
Fri Nov 10 04:11:31…
-
*kristrev:*
I am currently testing two MT7620 devices - the ZBT WE826 and the Sanlinking D240. During the first seconds of the boot, I see that packets leak between the WAN and LAN ports. Typically, …
-
*kristrev:*
I am currently testing two MT7620 devices - the ZBT WE826 and the Sanlinking D240. During the first seconds of the boot, I see that packets leak between the WAN and LAN ports. Typically, …
-
The scenarios we are using in the networks doesn't need vlans for the protocols. Let's remove them to reduce complexity and bugs (like #580 )
-
I am trying to compile openwrt v21.02 by following the README. The build fails by throwing this error:
"openwrt/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/mt7628-p4rev-120395/build/mt762…
-
Is there any news for mt7603 on a Xiaomi 3g? With openwrt drivers the 2.4ghz 7603 is basically not usable. the 5ghz works pretty good! Can we mix both drivers, for instance mtk7603 for 2.4ghz and the …
-
Hilink 7628 board uses MT7603 wifi driver from mt76 repo
I use OpenWrt 23.05.3 and I edit mt76 Makefile with
PKG_SOURCE_DATE:=2024-04-03
PKG_SOURCE_VERSION:=1e336a8582dce2ef32ddd440d423e9afef961e…
biboc updated
4 months ago