-
I have an stm32F103CB with 128kB fash and 20kB RAM, I am wondering as to how much of this will be used if I run the mesh master application on this and lets say we have 10 slave nodes connected to thi…
-
**Description:**
I have used python controller to run a stress test on my RPI sample dut (all-clusters-app) on Pair-Unpair test scenario for 10,000 iterations. The test passed in iteration 2763 witho…
-
### Board
seeed xiao esp32-c6
### Device Description
The development board is used without any other attachments. Only a powering / data USB-C cable.
See https://wiki.seeedstudio.com/xiao_es…
-
Hi,
I've updated to the latest 2024-10-26 release
And adding clock delay
[SDIO]
AddClockDelay=1
Still resulted in errors in the log.txt
```
Platform: BlueSCSI
FW Version: 2024.10.26-rel O…
-
## Summary
The RNDIS USB network driver fails to load and work properly on the newer iPad Pro M4 chip model and Raspberry Pi 5, while it works as expected on the Raspberry Pi 4.
## Environment
…
-
### The problem
I have a problem with Matter devices, I use a Apple Thread network and around 60+ Matter over Thread devices (Eve and Aqara), all worked perfect since the last or wo last HA updates…
-
### Describe the bug
While running ./scripts/pi-setup/auto-install.sh getting below error:
> Some packages could not be installed. This may mean that you have
> requested an impossible situati…
-
### The problem
I've seen the other related issues #123086, #123568, #123401, but they are all closed, so I'm creating a new one:
When attempting to update an Eve Thermo from 3.5.0 via HA, I get t…
-
Ascend NPUs are Huawei's neural network chips. Does AutoGPTQ currently support inference/training on Ascend NPUs?
-
**Abstract**
I followed the instructions to flash the ESP-Hosted-NG binary on my ESP32-c6 and I was unable to flash due to a chip support error.
**Details**
I have an ESP32-C6 dev kit ([link…