-
Hi there,
I installed gnuradio3.7.13.4 from source by following the process described from https://github.com/Nuand/bladeRF/wiki/Getting-Started:-Linux. The librairies used were extracted from https:…
-
Hi,
I've been able to replicate your project (detailed on your GitHub Pages site) up until The Simplest Experiment. I'm using a BladeRF and nRF52 DK alongside a Docker container. But I'm running in…
-
Hello,
Could it be possible for you, i you have some time to spend of course :-), to add a TX control panel ?
Something like
Enable (checkbox)
Frequency (textbox), power (slidebar)
Modulation none,…
-
Hey all, I've been trying to disable Qt-dependent features of GNU Radio for a docker install and have had no success with `pybombs config`. I've reverted to editing the recipes before installing.
```…
-
Hello I am trying to build gr-BladeRF for the source by following the procedure on the github:
git clone https://github.com/Nuand/gr-bladeRF.git
cd gr-bladeRF
mkdir build
cd build
cmake ..
make …
-
I'm trying to run the bladeRF-fsk, and I'm getting the following error:
Failed to set TX VGA1 gain: Operation not supported
Looks like a cool demo. I'm guessing bladeRF-fsk may not be updated fo…
-
I have gnuradio 3.10.1.1-2. make results in errors:
```
[ 46%] Building CXX object lib/CMakeFiles/gnuradio-osmosdr.dir/rtl_tcp/rtl_tcp_source_c.cc.o
[ 48%] Building CXX object lib/CMakeFiles/gnur…
-
I tested on multiple bladeRFs and I always get errors on my raspberry pi 5
```
Jul 22 15:20:16 pi sh[54887]: [ERROR @ host/libraries/libbladeRF/src/backend/usb/nios_access.c:68] Failed to send NIOS …
-
i try to update code for using sample rate = 122.88Mhz but i have issues so Could you please update python code and make it available for the public.
Thank you
-
It's been reported that the direct sampling mode using the ADC with the XB-200 is not working well or even at all. This is just to collect all the information and assign someone to look at the issue.…