-
Hello I'm Anwar
I'm using ESP 32 DevKit, Mini OBD-II as shown in this link (https://www.tokopedia.com/tokodibandung/super-mini-elm327-bluetooth-obd2-v2-1-automotive-test-tool-blue?whid =0), For the…
-
Hello,
I've configured a ESP32 to read DPF data from an Opel engine/ecu using the sketch from this project:
https://www.instructables.com/Opel-DPF-Indicator-Monitor/
At first it worked, but su…
-
Hi folks,
I have traced the code and have a doubt on handling of unexpected arrival.
In this implementation, `link->receive_protocol_result` will be assigned to `ISOTP_PROTOCOL_RESULT_UNEXP_PDU` whe…
-
Here is the following code i combined of the two.
output
```c
#include "BluetoothSerial.h"
#include "ELMduino.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#include"esp_gap_bt_api…
qqm55 updated
2 years ago
-
Thanks for the amazing library. Looks like a great potential!
I wired arduino to HC-05, which is paired to a good quality ELM327. I tested some parts of the code. Those are coolant temperature, RPM…
-
I am new to coding so I am having some trouble implementing this library with some code using your ELMDuino library. I just need the output of RPM to transfer to my Arduino Uno to be used further.
…
-
Hi! Could you please add the ELMo Library to Library Manager?
The GitHub address is [https://github.com/rudydelorenzo/ELMo](https://github.com/rudydelorenzo/ELMo) and I believe it conforms to the L…
-
hey, fine?
I'm having issue to conect and read my car, Renault Twingo 2001/2002 1.0 16v tha uses marelli iaw 5n ECU. i've tested with another car, Xsara Picasso 2004/2005, both uses ISO 14230-4 (fas…
-
Hello @PowerBroker2,
I just discovered this awesome library !
In the most basic example I was wondering if I can speed up the communication between my ESP32 and the Bluetooth ELM327 that I use…
-
### Hardware:
Board: Joy-IT Node MCU ESP32 dev Board
Core Installation version: 1.0.4
IDE name: Arduino IDE
Flash Frequency: 80Mhz
PSRAM enabled: …