-
#### Type of Raspberry Pi
#### Linux Kernel version
5.4.0-139-generic
kindly suggest a version of luma that can work with linux ubuntu. might be timing or handhake. using oled 128x32
…
-
### Discussed in https://github.com/olikraus/u8g2/discussions/2317
Originally posted by **egnor** December 8, 2023
I am using a [64x32 OLED from buydisplay/EastRising](https://www.buydisplay.…
-
Hi When using
If the text is over 10 characters it does not centre. code a simple example.
`#include
#include
#include
#include
#include
#include
#define SCREEN_WIDTH 128 // OLED…
-
I have used successfully used u8glib for a number of projects in Arduino environment with both the UNO and Mega boards. The connections from my OLED 128X64 to Mega2560 are as follows;
D0 - 52 (SC…
-
The SSD1306 is popular OLED display which can work over I2C, SPI and 6800 / 8080 parallel interfaces
-
Through some research on which display to purchase, I determined that Osgo uses the i2C protocol (right?) and not SPI. This style of OLED can be found in both configurations if complete with the break…
-
When running pi_logo.py from the examples I get the device info but the screen show for 5/6 static noise and only showing from the top a part (1/6) of the raspberry pi logo scrolling right to left?
I…
-
Hey I have included the library in the project folder yet i still get the following errors. What could be wrong? Am sure its something petty but I cant seem to solve it. I am using Atmega 16
main.o: …
-
### The problem
When upgrading to 2023.10.1, my display gets blank.
I use:
```
i2c:
sda: GPIO21
scl: GPIO22
frequency: 400kHz
scan: true
display:
- platform: ssd1306_i2c
…
-
I have a working SSD1306 Oled display working. I have bought more SSD1306 but they turn out to be using the SSH1106 chip but they don't work with Mycodo. I can see them on the I2C bus but all I get is…