-
Hello
I discover the esp32 and sensESP. I want to make a battery monitor.
The esp32 is connected in series to a victron mppt to recover its data.
An ina226 connected to a shunt must give the …
-
Hi,
I have problems when raising the `numChannels` variable from [Examples 1 and 2](https://github.com/sparkfun/SparkFunDMX/tree/master/examples) to values larger than `240`.
Within the example …
-
I have a PlatformIO project that I've been working on for several weeks. It's been working fine, but last week (around 1st August) the project stopped compiling.
```
xtensa-esp32s3-elf-g++: error…
-
### Description
Ocf connection can't be established on olimex_stm32_e407.
### Test Code
[OcfServer.js](https://github.com/01org/zephyr.js/blob/master/samples/OcfServer.js)
[OcfClient.js](htt…
-
After the most recent merge #976 the difference with upstream version used looks like so (some differences are omitted):
```
> git checkout 1f512eac32e614e893565741f93ea3739a522797
...
> git diff …
en-sc updated
9 months ago
-
I can't use ESPhome HomeAssistant add-in, while my RPi 3b, does not have enough memory.
I want to setup a Bluetooth-proxy. I can with the ready made package through https://esphome.io/projects/?type=…
-
the **factory sketch** build is OK, but the **filsystem build** reports error.
Data directory is there and not empty
any ideas?
Here is my output:
Processing T-QT-Pro-N8 (platform: espressif32; …
-
Hello,
Thanks a lot for the work.
Today using pyA20 the GPIO can switch at a frequency around 500kHz.
I would need faster switch frequency.
I saw some work on A13 (https://www.olimex.com/forum/in…
-
If you take `/SOFTWARE/Arduino/graphicstest_olimex` directory and run it, it displays great.
If you take the same directory and delete all Adafruit_* files from there, then in Arduino IDE go to Too…
-
This issue appears not to be very minor for the pyboard or any board using 64- or 100-pin versions of the STM32F405, so it could be low-priority or 'won't fix'. However, I encountered this running Mic…