-
HELLO,
since July I have an error code 23: Incompatible hardware detected, in the official android application (and on the OW itself by 23 blinks on the power button).
I didn't make any changes on m…
-
A major update on the OW (XR) was done recently and 150 miles went by with not issues. Now I am getting "out of safety range" message followed by OW will not operate afterwards. It has to be a safety …
-
A major update on the OW (XR) was done recently and 150 miles went by with no issues. Now I am getting "out of safety range" message followed by OW will not operate afterwards. It has to be a safety f…
-
I notice in the code there is a spoof function for the serial number is there any reason we cannot use a onewheel pint BMS in an XR the XR bms is broken and I think that the pint and the XR work off t…
-
Is it possible to have realtime updates when connected to the browser window on a phone?
Instead of having to refresh the page to check balancing and all that?
-
**Describe the bug**
OWCE stuck at scanning and doesn't find board. Worked as intended on my Android 10 phone, updating to Android 12 causes OWCE to no longer work. Downgrade to Android 10, OWCE work…
-
I am trying to diagnose this issue and will include a screenshot. Basically the BMS reports 0% which after a few seconds shuts the board down even though the battery voltage is at 56.88v. Where should…
-
Hi All,
First of all, the FOC firmware is awsome! I have build a OneWheel using 2 joined hoverboard motors. My first attempt with custom firmware was the bipropellant repo, after some fiddeling, I…
-
since i installed owie…
if i take a x minute break while a ride the app thinks i'm charging the Onewheel.
![E185907C-F074-423D-B203-FD3BA1019A43](https://user-images.githubusercontent.com/12873902…
-
I am trying to see if this is an issue or by design. The BMS reported SOC and the Overridden SOC are not the same value even after leaving the onewheel pint on its standard charger overnight. I updat…