-
Hello,
We are currently testing the Arducam mini with the 2MP OV2640. We are using the ArduCAM_Mini_2MP_OV2640_functions.ino on an arduino uno. We are getting good results when the camera is setup…
-
Hi,
I have a question regarding the usage of low power mode (GPIO_PWDN_MASK):
I have modified the standard web-sketch to put the camera into sensor standby after sending a photo and wake it up, when…
-
I am currently using the OV2640 for a research project and I would like to control the exposure and switch off all the internal Digital Signal Processing on the sensor. I have achieved manual exposure…
-
Can't use camera on my LILYGO® TTGO T-Camera Plus with OV2640 module
I've flashed microlite-spiram-cam-esp32-firmware from commit [3ed56ec](https://github.com/mocleiri/tensorflow-micropython-examples…
-
Hi i have an Arducam ESP8266 with OV2640 and i want to try the diferents light Mode, saturation, contrast and brigthness.
I found this document with examples like below and i saw than i must write …
-
Hi,
I've tried to make this module work with esphome and by reading the source code, I got the pinout properly I think. My current config is below. Am I missing something to configure?
```
esp3…
-
PIO Core Call Error: "Error: Invalid 'd:\\esp32\\ov2640_porject\\platformio.ini' (project configuration file): 'While reading from 'd:\\\\esp32\\\\ov2640_porject\\\\platformio.ini' [line 16]: option '…
-
Hi Mike! First of all thank you for you great work on this new board.
This post is not for an issue with the code, but rather a warning about the hardware.
Micropyton connection works like a charm…
-
What is the problem?
-
Hi,
I am using one of the cheap esp32-cam modules from eBay with the ov2640 camera. Arduino IDE v1.8.12 with the ESP32 board manager v1.0.4 (running on Linux Mint).
The image adjustments such as …