-
```
What steps will reproduce the problem?
1. Modify hello world, remove the loop
2. Test on a single node
3. Find out that when multiple sends, work fine, when one send, does not work.
What is the e…
-
```
What steps will reproduce the problem?
1. Modify hello world, remove the loop
2. Test on a single node
3. Find out that when multiple sends, work fine, when one send, does not work.
What is the e…
-
```
What steps will reproduce the problem?
1. Modify hello world, remove the loop
2. Test on a single node
3. Find out that when multiple sends, work fine, when one send, does not work.
What is the e…
-
```
What steps will reproduce the problem?
1. Modify hello world, remove the loop
2. Test on a single node
3. Find out that when multiple sends, work fine, when one send, does not work.
What is the e…
-
When i try to ping the cc26xx-demo with CC1310DK, i see that the acknowledge are see as collision is the border router (6LBR BBB with slip radio CC1310DK). With an oscilloscope i saw that the acknowle…
-
Hello there,
Andy here - Getting into packet and data radio lately, and not too impressed with VARA's extremely dated and closed nature and need for Windows. You haven't worked on this for a while…
-
@ajshank Hi Ajay,
The Freyja Autopilot instructions say (as per attached screenshot):
- "sr2: change all publish rates to zeros, except for EXTRA3 (battery info, system state) which can be set to 1H…
-
Currently I'm having the following error when ever I try to decode any packets:
I installed pcap via ```npm i pcap```
```
/root/node_modules/pcap/decode/ieee802.11/radio_packet.js:86
…
-
I have been looking at your gateway code and notes, trying to figure out how to simultaneously receive ESPNOW packets while being connected to an AP. Below is my attempt at the minimum receiver setup.…
-
Running latest 2.3.14 version (thanks for fixing that other problem in .13 BTW!
meshtastic --port /dev/ttyACM0 --dest '!25c2f43c' --get network
Connected to radio
Requesting current config from r…
zl3ag updated
1 month ago