-
I have a BTT Octopus I'm putting into my V2.4 - I have completed all my testing up to the Inductive Probe tests. I am not able to get the probe to work - it is perpetually open or closed, depending on…
-
Glasgow revC devices use 74LVC1T45 level shifters for the two ports. They support a 1.65 to 5.5 V voltage range, but lack official support for 1.2 V. @attie found out that Nexperia recently released t…
-
Hello,
While I was probing the board the "PS" indicator got stuck on ":P". The impedance of the pin is now very low (360 ohms). I suspect the board was charged with electrostatic and it burned the …
-
Do you have any pins you recommend i could reuse for a logical high/low?
I'm planning a dual extruder setup and want to produce a logical high when extruder0 is in use and logical low when extrude…
-
Hi,
First of all, thanks for putting this project together!
I'm trying to use this project to control/monitor the aforementioned pellet stove, but am struggling to find the right connections.
T…
-
PR #667 adds a strange DFN package with pins 1, 2, 5, 6 connected together to a large pad. And it also has an additional pin between pins 3,4. I have neither a good plan for the footprint name nor for…
-
Was using your guide on the tach 3-pin hotend fan from Orion and noticed that Klipper wasn't reporting the RPM when attached to my Huvud CANBUS pcb when attached to 5V endstops. https://ellis3dp.com/…
-
Document error: wrong optical sensor pin names in schematic in the readme file
In the readme file we have this picture shows the SX1103's schematic connection for A K EC
![sche_1103_pins](https:…
-
"The LTC5505-X is an RF power detector for RF applications operating in the 300MHz to 3.5GHz range. A temperature compensated Schottky diode peak detector and buffer amplifier are combined in a small …
-
I'm thinking about creating a solar charger case.
I created two different cases for the Samsung Galaxy Note 1 and one for the Samsung Galaxy 2. For that I basically took 8x0.5V solar cells (first case…
Aypac updated
8 years ago