-
There's an error in the schematic - the pins are swapped:
The symbol pinout is correct, but the wire lab…
urish updated
4 weeks ago
-
Hello i just installed MKS PI and most is working with an skr 1.4, until i tried to install the SKR PWC 3.0 on it. i con not find anywere the pinout to use. on raspberry my config was.
[power Prin…
-
I couldn't find in the pins diagram the identifiersfor the PT100/PT1000. I try to setup klipper to work with PT100 but I don't know whisch pin numbers I have to declare. They are missing from schemati…
-
does anyone know what that pinout is for the joystick i don't want to connect the pins wrong and break something. also would this 6 pin breakout board work with the ribbon cable? https://nl.aliexpress…
-
Hey, I did not find pin assignements instead of A5 and A6. UNO has A0-A5 only.
Could you help me please?
#define RS485_DEFAULT_DE_PIN A6
#define RS485_DEFAULT_RE_PIN A5
-
Made a **colorful pinout** for the **STM32H743VIT board** using the official WeAct schemes and STM32 datasheet.
Please review and if OK, I will send updated version soon (with all AF's added to pin…
-
Good afternoon
Is it possible change the pin from Z to Y? I'd like to use your GRBL, but my pcb are X 2,3,4,5 ad Y6,7,8,9
Carlo
-
I think the pin mapping for the Pi Pico is incorrect.
Managed to figure out the pinout and got it working with the RFM95W.
![pico](https://github.com/lnlp/LMIC-node/assets/30005006/6f1fd600-ae01-49…
-
### Please ask your question
Hi libdriver,
You write:
>Board Name: Raspberry Pi 4B.
>
>SPI Pin: SCLK/MOSI/MISO/CS GPIO11/GPIO10/GPIO9/GPIO8.
>GPIO Pin: CE/TX_EN/PWR_UP GPIO22/GPIO27/GPIO5.
>I…
-
Hi all
Trying this with a wroom-32, and I can't get my head around what D7 and D8 are on this board.
Looks like D7 may be GPIO13, but I can't figure out what D8 is at all, or what alternative pi…