-
I have a D1 mini and plan to use it with MQTT and openHab as the main hardware interface for a house alarm system. The idea is to have the currently installed hard wired PIRs feed their N/C outputs in…
-
How to turn on sleep mode in this sensor?
-
Tried to 'see' data from few 'luftdaten' sensors (4 example sensors) - but none is showing info:
However the sensors are working - ex. checked with command/link (sensor ID 37765):
`https://a…
-
Hi avaldebe, thank you for the great library.
I would like to use it on my MKRWifi 1010 board with Next-PM sensor , I tried to modify your PM serial Library and use it on my board but no luck.
**…
-
Hi,
I did not find any info about this in the wiki or in the GitHub issues.
Has anyone tried to run the firmware on other ESP8266 based boards?
E.g.
* [Adafruit Feather HUZZAH ESP8266](https://w…
-
hi
Yesterday I have tested my prototype of air quality station with pms7003 and found that PMSX003 reports data too frequently. As workaround i had added median and throttle filters.
Also i h…
-
- Build mega-20190830 test core 260 sdk3 16M at Wemos D1 mini Pro
- Discussed at the forum https://www.letscontrolit.com/forum/viewtopic.php?f=6&t=7019
- EspEasy with Senseair S8 active plugin abnor…
-
Hi,
I am trying to use your code, with a Geniunie Arduino Uno, connected with de AirQuality Monitor (from Plantower) with de PM2.5 Sensor Adpater with a IO Expansion Shield V7.1. Just as the wiki i…
-
Hello,
The suggested warmup time for the PMS1000-7000 is 30 seconds as documented here:
[https://www.aqmd.gov/docs/default-source/aq-spec/resources-page/plantower-pms5003-manual_v2-3.pdf](url)
Has …
-