-
First off, thanks for the work on this project, it should perfectly fit the bill for what I'm attempting. :) I'm looking for SoapyRemote to cross-compile for armv7,neon and I've gotten most of the w…
-
When using gnuradio, the sample rate cannot be set above 5MSPS, otherwise the waveform is not right.
![Screenshot from 2021-11-21 10-22-32](https://user-images.githubusercontent.com/8504573/1427468…
-
Hi.
I am trying to operate multiple pluto-plus at the same time.
so, i changed the ip address and host name in config.txt file each pluto
However, there are some issues like recognizing the pluto …
-
it is visible as a disabled software and it is telling developer should update his details
-
When using single antenna mode `-A 1`, LTESniffer seems to ignore `-a id=2` selection. E.g. with any SDR this happens:
`sudo ./build/src/LTESniffer -A 1 -W 4 -f 1869900e3 -C -m 0 -a "num_recv_frame…
-
Hi All,
I have been trying to send IQ samples, stored in a buffer, multiple times through Plutosdr but the SDR transmits only once, for sending multiple times the executable file needs to be re run. …
-
##### Expected Behavior
Installing urh with USRP support, it should list "USRP" as an option under Devices in the UI.
(I saw that USRP support was added quite some time back in 2017 - https://gi…
-
Given that there have been no updates to the firmware for some time, I decided to do so for my own edification among other reasons.
Please see,
https://github.com/DeonMarais64/PlutoPlusSDR-FW/rele…
-
## Issue Description ##
UE sees the network and shows message Found Cell: Mode=FDD, PCI=1, PRB=6, Ports=1, CP=Normal, CFO=xx(varies). But still the eNB and EPC doesn't show anything about UE. The UE…
-
Hello,
I am having some errors when building on Fedora 34 / gnuradio 3.9.
I generated the makefiles with Cmake, it was a bit hard, but managed to get all the dependencies in place.
However, when …