-
Hello All,
I've tried so many combinations now, but nothing works. I am using a Raspberry PI B (latest board revision) and a clean installed Raspbian Jessie updated to the latest versions. My PN532…
-
```
I'm trying to use the nfc driver with this board
(http://www.ebay.com/itm/PN532-NFC-RFID-Controller-Breakout-Board-For-Arduino-UN
O-Mega-2560-A124-/261124109868) without luck.
I downloaded the l…
-
**Describe the problem you have/What new integration you would like**
Make the reader trigger tag_on and tag_off events only once when tag enters and when tag leaves the presence. Existing binary…
-
I have a PN532 module plugged in HSU (UART) mode with a usb serial adapter.
Using `nfc-poll -v` and scanning various RFID cards and tags works flawlessly, but trying to scan a `YubiKey 5 NFC` doesn'…
-
Hi
The code is now installed, but I am getting a Requesting tag read failed! error and it wont read tags.
I have checked the wiring, and all looks goo, (SCA - D2 SDL D1 + 5V and Gnd) and the tag…
-
Can i emulate type 4 tag on PN533 usb? If the answer is yes, using forum 4 tag gives me "Not (yet) implemented" error. This is my nfc_target configuration:
```
nfc_target nt = {
.nm = {
…
-
I have connected a pn532 board via SPI port. I have successfully installed libnfc and it is able to get detected by nfc-list and nfc-poll.
What do I need to do so that it gets detected by pcsc_scan a…
-
```
I'm trying to use the nfc driver with this board
(http://www.ebay.com/itm/PN532-NFC-RFID-Controller-Breakout-Board-For-Arduino-UN
O-Mega-2560-A124-/261124109868) without luck.
I downloaded the l…
-
I'm using a ModeMCU - ESP8266 board
with this NFC reader: [https://it.aliexpress.com/item/33014782756.html?spm=a2g0s.9042311.0.0.6d6e4c4dy4vnIS](https://it.aliexpress.com/item/33014782756.html?spm=a2…
-
- Arduino board: Arduino Mega 2560
- Arduino IDE version 1.8.13
- List the steps to reproduce the problem below (if possible attach a sketch or
copy the sketch code in too): I am trying to conne…