-
I've seen the schematic of openplug on jackslab.org with integrated circuit U1 F7298DS in sot23-5 housing. Can you tell me the manufacturer or better a datasheet of that ic?
-
Here a few issues I've come across using the Power supply controls. There may be more coming as I use the software.
Power supply:
1. When hovering over the entry widget the mouse wheel should increme…
-
SMDH is sending a DC power monitoring solution.
We imagine in the field that the user may change the machine name.
We think it most likely that new machines will have a 12V DC power supply so want t…
-
### The problem
I used the power_supply component in the light component. The power supply is ATX. The power supply needs about 500ms to start up, so I set the "enable_time" parameter to 500ms. The t…
-
As we provided proposal on building AI powered chain of thoughts that will be available on ghdog web application, ghdog will get:
- AI powered web app
- Connected with Git(Hub)
- You'll have to hol…
-
We need a longer power supply for the Pi so we can have it securely attached to the display.
Step 1) Measure distances from nearby floor outlet and closest wall outlet.
-
- Work with propulsion to find a variable power supply (frequency varying as well)
- Research and document findings on three-phase motors and how to power them
- Present findings at end of sprint
- Pr…
-
I had had about 3-5 4chan from revisions E and older come back with dead 5V supply or strangely failing 5v supply.
Today's example: When the ECU is powered on after a long time of being powered off…
-
I seem to be getting a boot loop on the SommerESP v1.1 control board. It has a ESP32-C3. I flashed it with the base image Firmware 1.3 - 2024.6.1.
Loops this message:
```
[11:33:47]ESP-ROM:esp32…
-
Hi there,
nice work!
However, link to power supply mod is not available...