-
### Make sure you completed the following tasks
- [x] I searched the [discussions](https://github.com/bfgroup/b2/discussions)
- [x] I searched the closed and open [issues](https://github.com/bfgro…
-
Hello,
I am running upstream Linux **kernel** **5.19.2**.
**gcc** (and pru-gcc) versions are **12.1.1**.
**gnuprumcu** version is **0.8.0**
My platform is Beagle Bone Black (AM335x) rev C
I …
-
@orgua I have been thinking about regenerating the toolchain we've been using to see if some of the errors ([here](https://github.com/orgua/shepherd/blob/gcc-port/software/gcc-port/firmware/README.md)…
-
Hey hey, thanks for the project. I am building a little cross compendium of gRPC apps across languages and came across an issue with ruby grpc. Finally tracked down the source so thought I would raise…
-
The file on my SD card only has 2.8 GB but the script will keep copy until the emmc is full and eventually the emmc will have some boot issue.
`sudo /opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh`…
-
I am currently trying to use the TI SK-AM62 board with the ESP32-WROOM-32E connected via SPI, but it is not responding and I need help.
I have made the following changes to release/fg-v0.0.5.
I …
-
http://dinux.eu/gnupru/binutils-2.37.20211017.tar.bz2 This link is dead in the download-and-prepare.sh script in the 2021.10 release.
-
### Environment and version details
* Operating System+version: **CentOS 7.8**
* Compiler+version: **GCC 9**
* Shell: **Csh**
* B2 Version: Output of `b2 -v` and `b2 --version`
```
B2 Version …
-
After my Raspberry Pi Model 3 B+ failed to start due to a corrupt SD card, I did a full OS reinstall. Now I'm experiencing trouble building the firmware to flash the mcu. This is the on the latest v…
-
### Issue submission guidelines
See [detaled guidelines](http://crosstool-ng.github.io/support/). In short:
- Report crosstool-NG version
crosstool-ng-1.25.0
- Report host OS and its version
ubu…