-
I was unable to start an SSH session over tailscale, and I could see 'ILLEGAL ROOT LOGIN on '/dev/pts/4' from ' in the logs. I found this post:
[ILLEGAL ROOT LOGIN on '/dev/pts/4' from ](https:/…
-
https://www.quectel.com/product/lte-eg25-g-mpcie/
This is reportedly working on upstream MM and a customer reported it is not working in balenaOS.
-
When Quectel RM510Q-GL 5G modem is used, uqmi hangs on --get-device-status.
That results in qmi.sh waiting forever.
```
21376 root 1452 S {qmi.sh} /bin/sh ./qmi.sh qmi setup a1 {"proto"…
-
The README flashing instructions could use some clarifications. Here are some points that I find considerably confusing and misleading:
> Make sure you have fastboot installed in your host system
…
ell1e updated
10 months ago
-
Hello.
Thank you so much for sharing this very helpful repository.
Do you have any code on how to link to an nb-iot network from BC66 using Arduino Software?
Thank you
Best regards
Oline
-
Hi all. Does anyone know an NB-IoT device that is compatible with this software?
-
-
Soracom Onyx USB Dongle hosting Quectel EG25 - LTE cat.4 module based on Qualcomm MDM9207
Live traffic view via e.g.: `./qcsuper.py --usb-modem /dev/ttyUSB0 --wireshark-live --decrypt-nas --reassembl…
-
Seen on 1.6.0-pre.35.
```
EXCEPTION error.
AT_COMMAND_TIMEOUT
0: Session.send. /at/session.toit:291:22
1: Session.send_ /at/session.toit:333:22
2: Session.send …
-
Description:
When devices with Quectel LTE modules loose connectivity (e.g. due to weak LTE cell connectivity) we observe that reconnects fail because an uqmi process (triggered by netifd/qmi.sh) st…