-
This is following on from the discussions in Issue #8 as it is really independent to the spec files.
-
radvd supports selecting the prefix automatically when `::/64` is used as a special value, however only static IPs are supported in RDNSS messages.
I think it would be a useful feature to support a…
-
# McDebian 5.6.14 Beta
## Updates:
- Linux Kernel 5.6.14
- Implementing nftables flowtable offload which increases the DSA switch wan to lan routing to gigabit speeds for single connections (didn…
-
My setup is not using RPL at the moment (no decent linux support available to my knowledge).
Using one device with radvd as RA daemon works fine. If a second devices is used in the same /64 sub-net…
kown7 updated
7 years ago
-
Please update the README comment regarding Google/Android devices. It implies that GUAs can't be used with Google/Android devices, which is incorrect.
Once an interface has been assigned a GUA p…
-
Hi friends,
If possible, add the option "auto" for AdvValidLifetime and AdvPreferredLifetime.
this option is intended for use with dynamic prefix with short lease time assigned by some providers…
-
### Component
systemd-networkd
### Is your feature request related to a problem? Please describe
Unable to accept prefix delegation `IPv6AcceptRA=yes` to a unicast address.
In this scenario ther…
-
#### Description
While running the auto restart test for syncd the following error log is observed
```
May 15 11:12:15.218858 arc-switch1004 ERR radv#radvd[25]: Vlan1000 not found: No such …
-
can odhcpd can assign a /112 ipv6 for clients? I get /64 from isp, so I can only divided /64 to subnets. therefore slaac is missing.what I hope is to use dhcpv6 to assign ipv6 automaticly. how to do i…
-
**Important notices**
Before you add a new report, we ask you kindly to acknowledge the following:
- [x] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/…