-
-
In the OTAA example sketches, it helpfully instructs you as to what endianness you should use for each item.
Unfortunately, the same cannot be said for the ABP example. After extensive testing I'm …
-
Hi!
I don't know why I am not able to send anything from my RAK831 Gateway to my RF95 node using util_tx_test.c program as plain LoRa packets. Things I checked:
- tested inverted modulation from gat…
-
lora-packet-forwarder_4.0.1.bb fails with the following errors:
yocto@37458b161cfb:/build$ **bitbake lora-gateway-os-base**
Loading cache: 100% |###################################################…
-
Do you
![rak831](https://user-images.githubusercontent.com/37892112/44265821-d4b6e800-a245-11e8-8892-4a5258907080.PNG)
know how I can set G8 and G16 pin to get max output power? Thank you.
-
hi ,first of all thank you for providing this code to successfully make the lora-gateway. when im using this my gateway working properly but only problem is not getting the range of lora-gateway. Acc…
-
Some things I'd expect to see in a README
- what this code is for
- who wrote it
- where you can order these parts
- when things are expected to ship
- why you might want it
- what else you mi…
-
Hi,
possible change software (add #define ... to library.cfg for example) so i can use GPIO mode 2 and GPIO0 as "rx_buffer_not_empty" on PIN7 to implement interrupt mode on RPi ?
Thanks in advance…
-
hii , I have set the gateway power to 30dBm. I wanted to know how does it exactly affects the gateway when I change it. I mean on the RAK831 gateway board which pins does it affect so it reduces or in…
-
The payload i get with tbeam is just this small thinghy, possibly a problem with tbeam?
i have decoder and converter in place, packet is plain
![untitled](https://user-images.githubusercontent.com…