-
Hello.
Your documentation says:
>NIC that can connect to a RAW socket.
Can you decipher what this means?
1. Which network cards are suitable for experimenting on a PC?
2. And will they work o…
-
**Abstract**
A comprehensive talk on possibilities of using python with raspberry pi, microbit, circuit python, etc. Answering the following questions plus everything else that would help a newbie t…
-
I have just bought Big Dipper board and I'm going to run it with Raspberry Pi i n SBC mode.
First of all, I replaced firmware for Duet5Mini+ suitable one, downloaded from Duet3d website. In no-SBC…
-
I think the latest set of releases have shown some real holes in our testing.
I would propose we setup some automated testing to flash the firmware onto all the appropriate boards and run some tests …
-
The Raspberry Pi Foundation unveiled the new RP2350 micro-controller a few days ago. A brief summary of changes and additions:
- Utilizes faster and more powerful Cortex-M33 cores (ARMv8 architecture…
-
So, great stuff. I'm building an app using noble on osx and a raspberry pi zero w. they are both using nodejs 13.13.x and trying to connect to an iphone x, xs and iphone 7. the three phones have alrea…
-
I wanted to send images jpeg format which is taken by embedded boards like raspberry pi and esp32-cam to edgex via devicemqtt using mqtt protocol. Can you tell the process of doing it. From edgex thos…
-
I successfully build the pico-logic project by @markb139, it works great. I build both the RP2040 Pico firmware and the libsigrok driver.
The code uses the following pins on the RP2040 Pico board:…
-
Hi, thanks for the great project!
I set it up for my hardware and facing an issue: I need to control a fan.
The logic is the same as for the heater (apparently) because I connect it to a reversed …
-
I am referencing [The Getting Started Guide](https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf) as of 23-Aug-2024. The document is clear on how to use the command line to change `…