-
### Describe the bug
I think DHT11 module doesn't work with my kernel image
### Steps to reproduce the behaviour
**My aim is to read dht11 from the file system (kernel module)**
Steps :
…
-
Used by Apt in `/etc/apt/sources.list`
```
deb [arch=armhf] http://mirror.us.leaseweb.net/raspbian/raspbian/ bullseye contrib firmware main non-free rpi
```
https://www.raspbian.org/RaspbianMi…
-
The software uses the RPi.GPIO module to access the GPIOs. This module seems unmaintained, the last release [0.7.1](https://pypi.org/project/RPi.GPIO/#history) was on Feb 2022.
One [known issue](ht…
-
### Version
0.12.0
### Operating System
Debian 12 (Raspberry Pi OS)
### How are you running SpoofDPI?
I'm using Raspberry Pi OS (aarch64) based on Debian 12 and start with args:
./spoo…
-
Hi,
I've installed this package on a Raspberry Pi 4 running Raspberry OS. It seems to be working fine but I get inconsistent readings. For example, temperature reads as 2.3, tension does not change,…
-
From initial testing, we've [discovered](https://github.com/tiny-pilot/tinypilot-pro/issues/1113) that some of TinyPilot's dependencies fail on Raspberry Pi OS Bookworm.
This is a high-level ticket…
-
I got scrcpy version 2.7 (somewhat) running on my Raspberry Pi (Debian Bullseye). My device's screen is a tad longer than FHD and my Linux desktop is FHD, so I got it to display like this:
> scrcpy -…
-
### Describe the bug
When using the CX31993 USB sound card on a Raspberry Pi Zero 2W with application running in KMSDRM mode, the audio is choppy, even when selecting a low sampling rate. However, …
-
### What happened?
Hi there,
Not sure if this is intended, but when flashing a new image of a Pi Zero W Bullseye OS Lite, it seems that the autologin is not configured..
I feel it should have autol…
-
After installing the snap and opening it, keyboard input isn't registered. Keyboard works fine after the application is terminated. It's a standard 105-key wireless keyboard being used over the USB 2 …