-
Using a very simple web server on the Pico_W, running it once works fine. Running it a second time throws an address in use error. The only way to reset the system is to remove power. Stopping the dev…
-
I'm trying to use this library in a Raspberry Pi Pico project but I am having issues importing it.
Currently I have the following CMakeLists file for my project:
```cmake
cmake_minimum_required…
-
> Status bar toggles between Pico Connected and Pico Disconnected
**Output logs:**
2024-02-06 12:54:04.792 [info] [Stubs] Installed stubs are already up to date!
2024-02-06 12:54:04.794 [info] […
-
A task list for hardware support for the RaspberryPi Pico. (Inspired by #38657.)
## Peripherals
- [x] ADC and temperature sensor
#45363
#53591
- [x] DMA
#53892
- [x] Flash
#47806…
-
I've had trouble getting a Pico W to connect to WiFi after the UART has
received data.
For example the code below often doesn't connect to the network if
serial data is being sent to pin 2 of th…
-
Hello
Will you please add support for the RP2040-PiZero?
https://www.waveshare.com/wiki/RP2040-PiZero
Thanks
-
My main.py will connect to my mqtt server and Blynk 2 with Thonny on my Mac and also on a stand alone battery,
but will not connect on my ubuntu 22.04 machine.
-----------------------------------…
-
### Operating System
Linux
### Arduino IDE version
Arduino 2.3.2
### Board
Raspberry Pi Pico (FQBN: `rp2040:rp2040:rpipicow:usbstack=tinyusb,ipbtstack=ipv4btcble`)
### ArduinoCore version
https…
-
I compiled sigrok and pulseview based on your fork. Everything is working great, except that I've noticed that I get crashes after renaming channels. For example, I open pulseview with this command:
…
-
Hello, pico-feedback team,
I am reporting a consistent issue that occurs when the battery-powered Raspberry Pi Pico W is connected to a host PC via a USB Type-C connection. Below are the details an…
oyama updated
6 months ago