-
Hi,
After changes introduced in 72af0a32d54e2ecca52d022d6bc635d78b8b7227, building fails on Debian Bullseye gcc version 10.2.1 20210110 (Debian 10.2.1-6)
```
[ 33%] Building CXX object CMakeFi…
-
When starting a wifi access-point with this code:
`import wifi`
`wifi.radio.start_ap(ssid=ssid, password=pw, channel=chn)`
It will always use same local IP for the network it creates: 192.168.4…
-
Lässt sich das Programm nicht ausführen bitte folgende Schritte durchführen:
1) Terminal im Projektordner öffnen
2) sicherstellen, dass PIP auf der neusten Version ist, wenn nicht, dann bitte die ne…
-
there isnt a version of it for real programmers? not using stinky OOP?
-
**Describe the bug**
In OpenHD 2.0.0-404-g64a4d92, when using a v4l2loopback based camera, the pipeline fails to be created. The code that autogenerates the pipeline includes a bitrate property to th…
-
During the IOT hackathon I was playing with some [DS18B20](https://cdn-shop.adafruit.com/datasheets/DS18B20.pdf) temperature sensors. These use the one-wire protocol which is supported on the Raspber…
-
Hi, I'm using the latest version of fluiddpi with fluidd, moonraker and klipper all updated on a Raspberry Pi Zero 2. The printer is an Eryone Thinker S with an ATmega2560 based motherboard. I've had …
-
Hello
I saw this today
Nextcloudpi 1.39.1
-
I'm attempting to install on Oracle Linux 8.3, aarch64 architecture.
snapd was installed using epel-release 8, resulting in the following versions:
```
$ snap version
snap 2.50-1.el8
snapd …
-
Fri 30 Sep 2016 05:03:34 PM UTC
CH341A or CH341H SPI Flash/EEPROM programmer.
This code was successfully tested on Windows with libusb driver.
[file #38632: 0001-CH341A-Programmer.patch](https://sav…