-
Hello,
I'm not sure, if this is due to my mistake or a kinf of bug.
System: SignalK version 2.3; autopilot plugin :latest version with Raymarine seatalk 1 AP and wilhelmSK and freeboard.
Issue: Wh…
ckcrs updated
11 months ago
-
Thanks for a good plugin. It works well with $Stalk 0183 outputs, and I can see the reaction to any keypress in the communications debug window.
However, experimenting with the N2000 elements I ha…
-
-
Have an Autohelm 3000 that I plan to convert to PyPilot.
The sailboat have Raymarin plotter axiom 9 , on the NMEA2000/Seatalk^NG bus I have GPS, Wind, logg, rodder angle and an Ardruino configure wi…
-
Hi All,
I have connected an Shipmodul-3-N2K connected through usb to signalK. This part is working fine. However if i connect the evo1 compss and a n2k raymarine autopilot the autopilot is not dete…
-
Dear Scott,
Can you please add support for :
- Temperature via PGN130316 ( Cabin )
- Humidity via PGN130313
- Pressure via PGN130314
BR Torben
-
That wind indicator is on a long arm (mast height + wand) waving around changing the wind data vectors and magnitude. This data is used for sailing to the wind and thus it can dramatically affect an a…
-
I have a Simrad AI50 that sends AIS data to a RPI4 with a pican-m hat. I then use signal-k to send the AIS-data on the NMEA-2000 bus. Works great, but the strings in the AIS message have some garbled …
-
I am having trouble getting openCPN to recognize my Raymarine Quantum 2 Q24C radar.
I have the Quantum radar connected directly to RPi via ethernet, but openCPN radar setup window just says "initia…
-
According to the YDNU-02 manual, the N2K format "is based on Data Link Escape encoding partially compatible with ActiSense NGT format". The actisense-serial utility partially works to format a N2K du…