-
Would be nice to get support for that sensor, very useful for presence detection and lot more efficient than PIR ;)
https://www.14core.com/wiring-the-rcwl0516-auto-induction-doppler-microwave-radar-w…
-
### ISSUE DESCRIPTION - TROUBLESHOOTING
Hi!
I need some help or fix this issue.
Tasmota version: 6.6.0
I have a Sonoff basic module, I connected a RCWL-0516 radar motion sensor to GPIO14 as swtc…
-
I have found a few people here asking if there is a 5V out pin on the Sonoff Basic R2 but in the threads I have seen, nobody seems to have found it. Well, there is a 5V out on the board and it works l…
-
Hi,
in the last versions I am experiencing a constant reboot (every other day) with "Hardware watchdog" as the Reboot cause.
I have also changed from Static IP to DHCP.
How can I find the cause of …
-
Hey guys,
I am really no coder and have some difficulty's with some piece of code so hopefully someone can help me.
I have a working piece of code for an DCF DS3231 however I would like to make …
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x] Searched the problem i…
renne updated
5 years ago
-
I'm trying to figure out a way to have a simple Radar sensor (The RCWL-0516) that goes high (3.3v) on GPIO14 only send a message to my MQTT broker and NOT switch my relay (that powers some LED lightin…
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
Hello G6EJD,
first of all: Thank you very much for this project and all the hard work you put into it. :)
I updated yesterday from v8 to v13 and found some minor issues which I like to report to…
-
Hi everybody,
I am running `Sonoff-Tasmota 6.2.1.3 von Theo Arends` on a nodeMCU. The following things are connected
| nodemcu with tasmota | reed sensor | RCWL-0516 radar sensor |
|-----------…