-
Resistor dividers are useful for connecting multiple buttons to a single analog input pin, as [described here](http://www.ignorantofthings.com/2018/07/the-perfect-multi-button-input-resistor.html). Th…
-
First: the Interactive HTML BOM project is awesome and amazing!
How about: if you hover the cursor over a resistor the color code appears at the top?
Guustaaf
-
Can you tell the capacitance and resistance of the capacitor and resistor required?
-
One project I want to do with my PYB is to interface with DaisyLink bus boards, which are I2C with some frills. DaisyLink puts the pull-ups on the slave boards (switchable), so the pull-ups already fi…
-
Shouldn't there be a small resistor in series with the capacitor and the encoder contacts to prevent the cap short circuit to GND?
-
A friend added a feature like this to duckduckgo some time ago.
https://duckduckgo.com/?q=16+ohms&t=hg&ia=answer
You put in the resistance you want, in ohms, and it prints out the colour bands y…
-
According to the reported voltage values and assuming that R2 = 1KOhm, it looks more precise to set R1 to around 520Ohm, to have a voltage of 3.3Volts between D4 and D5.
A R1 = 480Ohm resistor will…
-
Necessário criar esquema dos resistores da placa base, com as trilhas de cobre e seus resistores posicionados em cada encaixe.
-
## Expected Behavior
ppolyf_u_2k_6p0 has a sheet resistance of 2k/square.
## Actual Behavior
The resistance is much lower than this (68 ohm).
This is also true for the other ppolyf resisto…
-
Resistors values must change given as below
R5 -- 2K2
R6 -- 10K
R7 -- 4K7