-
**Describe the bug**
while building the kernel v 5.10.y patched with RT official patch, ./include/linux/seqlock.h
**generate errors :**
`./include/linux/seqlock.h:302:37: error: ‘_Generic’ sele…
-
### Describe the issue you are experiencing
Mit Nightly 3.77.6.20240703 startet der `sshd` nicht.
### Describe the behavior you expected
Normaler Start vom `sshd`
### Steps to reproduce the issue
…
-
### Describe the issue you are experiencing
Der Status des HmIP-SAM zeigt seit der OCCU Version 3.77.X keine Werte mehr an.
![State](https://github.com/jens-maus/RaspberryMatic/assets/40276118/aa2a8…
-
### Describe the issue you are experiencing
Die HmIP-FROLL lassen sich nicht mehr über die WebUI bedienen.
Weder mit "Auf - Ab" Buttons, noch über die Eingabe eines Prozentsatzes im Bedienfeld.
D…
-
Hi,
I am using RAK 2247 through SPI with my custom board. I am trying to use inbuilt LNS in my gateway and for that I have done all producers as per readme file.
When I run it using "/opt/ttn-…
-
### Category
Other
### Hardware
DIY
### Firmware Version
2.3.13.83f5ba0
### Description
The MQTT connection configuration on Portduino only works through the Android app, and it continuously co…
-
Hallo, ich habe ein ähnliches Problem wie hier #484 . Ich hatte auch versehentlich da gepostet. Zu spät gesehen dass schon auf closed.
Also bei mir genauso. Raspi geupdatet, danach kein pivccu mehr…
-
Hello!
First off, thanks for this project! I've written my own version of the TX side from the ground up to use the FIFO buffers on the si4463, eliminating the RS232 overhead. I've also slightly mo…
-
### Describe the issue you are experiencing
just cosmetics, if going to device > firmware overview > device firmware, there is the icon for the HmIP-HAP missing
### Describe the behavior you expecte…
-
### Describe the issue you are experiencing
If you do gas metering with HM-ES-TX-WM_CCU and RaspberryMatic, the "Energy Counter - Central" field is increased with value of "Energy Counter - device" f…