-
Trying to collate some thoughts on what auto_rx would need from a multi-channel SDR server (think: SpyServer, but actually open source) into one place, instead of scattered across multiple issues.
…
-
Could you provide a flashable release file so installing MDK and friends won't be necessary?
-
I am trying to receive a RS41 sonde in 403.000 MHz (from Madrid, Spain)
I have attached the same antenna I am using, with an RTL-SDR and check that I am receiving it.
Also, when I look in the spec…
-
```
RuntimeError: false INTERNAL ASSERT FAILED at "/opt/pytorch/nvfuser/csrc/executor.cpp":404, please report a bug with repro script to NVFuser at https://github.com/NVIDIA/Fuser/issues. Allocations…
-
If the software detects a probe, the decoder remains attached to this probe.
But as there are many probes in the air it would be good if the decoder could jump to the next probe after a few seconds.
-
@srcejon
Hey! I am tracking RS41 and want to have full flight log in CSV file, but cant find a way to get altitude to be written into csv log file.
Could you explain how i can make it work? Or, if…
-
**Home Assistant release with the issue:**
0.95.4
**Last working Home Assistant release (if known):**
New component, wasn't present in previous releases
**Operating environment (Hass.i…
-
The address fields and the routing fields in the packet header are transmitted in a mixed order.
Expect:
[sender callsign]>[to callsign],[WIDE1-1],[WIDE2-2],:
TRANSMITTED ORDER:
[WIDE2]>[WIDE1-1…
-
Hello Guys :)
I'm using a t-beam v1.2 board and i have see/found a bug.
When i'm use ili9225 disp with 180 degree rotated disp (option 3) then when i clik some of buttons on the bottom of board
…
-
About 5 times a week the older iMet's fly from different locations in the EU, none of them show on the sondehub page .
Is it possible to add support for those iMet's too ? They decode with the "reg…
zanco updated
8 months ago