-
Hi there
I have tried this on my Raspberry Pi 4 with ubuntu 20.04
when I do `sudo ./transmit 5 p` I got
```
Command 0xA returned error 0xC
Command 0x39 returned error 0x1
Supported Low Energy …
-
**RTL8761BU** is a Realtek bluetooth chip.
When plugging in an Asus USB-BT500 bluetooth dongle on NixOS 22.05, the firmware is not found:
```
[ 77.088183] usb 3-1: new full-speed USB device n…
-
https://bbs.hassbian.com/thread-17392-1-1.html
简单总结一下启用串口蓝牙电路的要点:
0. 认识自己的硬件,蓝牙芯片、接口,安卓系统是一个比较可靠的地方,其次是网文;
1. 换用启用了串口uart_A的dtb,网上找或自己编译;原来的dtb默认都是禁用了这个串口。换dtb后ls /dev/tty*确认串口已出现在系统里。比如ttyAML1…
xcray updated
2 years ago
-
I'm using a BCM20702A1 USB BT interface attempting to get HFP working on some Bose QC-35 headphones. A2DP is working, but aplay with SCO just produces silence of the appropriate length. The bluealsa…
-
This is a known issue. Please just update the kernel if it is possible.
```
sudo dmesg | grep usb
[ 3921.564927] usb 1-1.5: USB disconnect, device number 4
[ 3924.809662] usb 1-1.5: new full-speed…
-
## Общая информация
* **версия Home Assistant**: 2022.9.6
* **способ установки Home Assistant**:
[ ] venv
[x] Docker
[ ] Home Assistant OS
* **версия компонента**: 4.1.1
* **…
-
have
debian with installed Home Assistant 2021.3.3
installed HACS
installed ble_monitor 1.3.0
updated to last versions
bluetooth ORICO BTA-508 (RTL8761B)
one of devices, that doesnt need tok…
insof updated
2 years ago
-
Hi,
I've changed my BT 4.0 to BT 5.0 adapter, but it does not work with my LYWSDCGQ devices. Main reason why I upgraded to BT5.0 is range. I have custom debian server, and bluetooth device is on 2m …
-
blueman: 2.1.2
BlueZ:
Distribution: Linux Mint 20.2 Uma Kernel 5.4.0-94
* [x] I have consulted the [Troubleshooting page](https://github.com/blueman-project/blueman/wiki/Troubleshooting) and d…
-
**Hardware Environment**
- [ ] Raspberry Pi [1/2/3/4]
- [ ] ODROID [C2/C4/N2(+)/XU4]
- [ ] ASUS Tinker [S]
- [ ] Generic x86-64 (like Intel NUC)
- [x ] OVA (Open Virtualization Applicance, …