-
**Describe the issue**
I am currently using the thingsboard-gateway to collect telemetry data from my equipment, using RTUs from the oil field. the problem I am having is that each rtu only allows a …
-
I found "ReadTimeout { get; set; } = 1000;" in ModbusRtuClient.cs. Is this 1s timeout the best value? I read in some device's Modbus docs that max timeout for response is 5 seconds. I am not sure is t…
-
Hello, is there any Plan to include RTU over TCP?
See: https://www.simplymodbus.ca/TCP.htm
Or https://github.com/stephane/libmodbus/pull/445
Best Regards,
Bernd
-
Hi all ,
I have **successfully installed master branch of modbus-cli on my ubuntu-20.04.3 os**, from given link- https://github.com/favalex/modbus-cli
I want to use `modbus rtu slave stack,` i a…
-
Is the creation of modbus slave tcp over rtu supported?
-
## RTU-02C: Redundant Conditional Clause
| Type | Severity | Location |
| ---- | -------- | -------- |
| [Gas Optimization](/appendix/finding-types#gas-optimization) | | [RebaseTokenUpgradeable.…
-
When a Modbus RTU device is setup with a baud of 4800, FUXA does not wait long enough for the transmission to complete before throwing an error, e.g.:
"2024-03-10T04:59:22.271Z [ERR] 'Weather St…
-
- *Which operating system are you using?*
**Windows 10 x64**
- *Describe the exact steps which reproduce the problem* in as many details as
possible. For example, the software/equipment which ru…
-
If i read sequentially two the sets of registers, the second read never return.
For example:
let rsp1 = ctx.read_holding_registers(32000, 20).unwrap();
let rsp2 = ctx.read_holding…
-
When one is targeting slaves with MODBUS_BROADCAST_ADDRESS and say you issue modbus_write_registers,
the code after sending a frame still goes through
if (rc > 0) {
uint8_t rsp[MAX_MESSA…