-
First version will be using a this component
https://github.com/timbuntu/esp-idf-scd4x
[Datasheet of SCD40](
https://sensirion.com/products/catalog/SCD40)
-
### PROBLEM DESCRIPTION
The console commands for the SCD40/SCD41 sensor are not recognized (scd40cal, scd40test, etc.) I compiled my own binary with support for both the SCD30 and SCD40/SCD41 sen…
-
The [Low Power Operation document](https://sensirion.com/media/documents/077BC86F/62BF01B9/CD_AN_SCD4x_Low_Power_Operation_D1.pdf) says:
> Power Cycled Single Shot Operation (SCD41 only)
But the…
-
**Describe the bug**
Add a relay (on mine off is on), switch relay to On, i.e. Not Default toggle option, then goto component and update label or icon for one of the toggle states. Relay gets toggled…
tyeth updated
2 years ago
-
SCD40 is samping ~ 4F higher than external sensor sitting next to it. Need to check with calibrated sensor to determine which sensor is inaccurate, and if SCD40, look for calibration API
-
**What's the full name of the component you'd like to see in Adafruit.io WipperSnapper?**
Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor
**What type of component is this (i.e.: Pin, I2…
-
i would love to compile a version of tasmota with webcam + ws2812 LEDs but i always run into this error:
```
2023-01-20T22:53:00.723Z server {
"showDownloadLinks": false,
"features": {
…
-
Working on [ESPEasy](https://github.com/letscontrolit/ESPEasy/), a plugin based IoT solution for ESP8266 and ESP32, we have been struggling with keeping sketch size as small as possible.
Using this l…
-
Probably my fault, but the s3 feather with psram is not keeping the co2 data updated, seems like it's logging erroneously too, this is the bootup and I've never seen so many connected messages between…
-
# Negative values for setTemperatureOffset
**Humidity increases and Temperature decreases on each subsequent sample**
co2monitor/0/up/sensors {"co2":766,"temperature":"27.4","humidity":"48.1"}
…