-
Hi everybody,
I have a problem with the ATWILC3000 development shield and my beaglebone black.
I use the SDIO Interface to connect the beaglebone and the WILC3000 via Jumpe wires (I know that this…
-
Hi,
I am trying out the esp-hosted first generation with SDIO.
I have 3 questions:
- I am using the ESP32 Wrover Kit (with the ESP-WROVER-B module onboard). On the [troubleshoot](https://gith…
-
esp_host_fg supports esp32C6 and uses sdio to transfer network data. linux_hosted will support the current version. Will the main adaptation work in esp32c6 mcu?
-
Using the driver on an Odroid Go Advance Black edition with mainline kernel 6.1.61, the driver works for a while but the SDIO device seems to drop off the bus after a while. The kernel tries to load t…
ab0tj updated
11 months ago
-
Environment:
- rpi w2
- 12/11/2023 64 bit raspios lite
- wifi_up_down: True
- rpi3bplus_rpi4_wifi_firmware: 19
- rpizerow_rpi3_wifi_firmware: os
dmesg | grep Firmware:
`[ 14.091548] brcmfma…
-
- [x] Test using open()/read()
- [ ] Test using fopen()/fread()
-
esp32c6 as slave , mcu run linux kernel 5.10 , using esp-hosted-fg as codebase
-
@Qwerty-OFF how much pin conflict would be get if we switch SD card from SPI interface to SDIO interface?
Sample board with SDIO see https://rusefi.com/forum/download/file.php?id=4174
-
It would be helpful to add those two pin mappings, as it would help (p)HAT designers avoid trashing those busses by using their pins as arbitrary GPIO. I'm looking at you, you naughty pirates.
Ther…
-
*sandinak:*
ACM3200 radio2 crashes when performing a client binding to an existing AP.
First seeing this:
[ 16.871856] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[ 16.87…