-
### I'm sure that
- [X] This issue is still present in the **current beta version** of this adapter
- [X] There is no other (open) issue with the same topic (use the search!)
- [X] This issue is …
-
Will the shelly plus plug s, type SNPL-00112EU be supported in the future?
-
Hi,
do you see a Chance to Support the new Shelly Blu D/W sensor?
[https://shellyparts.de/products/shelly-blu-door-window](https://shellyparts.de/products/shelly-blu-door-window)
-
The Shelly 3EM / Shelly Pro 3EM is not in the list of devices yet.
What would be the correct address, 0x1000 or 0x7000?
-
### The problem
I've had a Shelly EM for over a year now and all good until about 3 months ago when the power measurements updates slowed right down to sometimes as slow as once every 40 seconds.
It…
-
### The problem
Hey there folks,
Since the 2024.9.0 version, I started to notice that I do see some of the Shelly devices disconnecting more often.
I don't recall any change made to my wifi net…
-
## Expected Behavior
When setting a value between 0 and 100, I expect the roller shutter to be set to this pre-calibrated position.
## Current Behavior
Randomly (no every time) values are mapped …
-
### The problem
The "early_pin_init: false" does not work with light component.
In this case the relay toggles "off" for a short time at boot (when relay was "on" at boot):
```
esp8266:
…
-
### Feedback
I am unable to get the correct power reading displayed in the Energy Usage Dashboard. It displays ok in the Main Dashboard. But I can't get the sensor to display in the enegry dashboard.…
-
### The problem
For one of my Shelly devices, I get an error about every 1,5-2 weeks, since I moved this Shelly to another subnet (another IP so).
I reconfigured the device as well as removed it and…