-
Hi,
would be nice to have a sort of Slope knob on ANALYZER, so we can change the visualization of the frequencies across the spectrum (such as Slope 6db to "flat" the spectrum of a SAW wave).
Is…
Nowhk updated
4 months ago
-
I did some measurement work on Silpa and its RF signal path and here are the results.
## AM/AM measurements
Measurements were performed using a signal generator and a spectrum analyzer. A continuo…
-
A piece of code would provide an additional menu entry showing peak-to-peak voltage value for the incoming signal. That would make having a scope not necessary to tune the input baseband level. The va…
-
I have rtl_tcp running on a remote system, connected to an RTL SDR Blog v3 stick.
Using rtl_tcp with tools like gqrx or rtl_433 with the source defined remotely (rtl_tcp) works fine.
Using urh, I ca…
-
I got new xtrx.
installed driver on Ubuntu 19.04 from repo https://launchpad.net/~fairwaves/+archive/ubuntu/xtrx
and compiled osmo-trx from https://github.com/xtrx-sdr/osmo-trx
I can see signal…
-
Hello,
I am very interested in your spectrum analyzer. One question, is the bluetooth module operative in the sketch? In other words, is code included for the bluetooth to be usable. I'm not seein…
-
Option to auto-save the Spectrum analyzer image in the same folder as the checked audio file
-
Would it be practically possible to use the analyzer/visualization with an already existing FFT stream, which by the way is not necessarily audio, but other spectrum data.
It seems like the AudioCo…
-
looks like from the spectrum analyzer evaluations of the latest, updated code
only LoRa leakage, no mixed signal, no LO leakage can observed...
![image](https://user-images.githubusercontent.com/1…
-
Hi Nathan,
Was trying out the package, and after installing as per instructions, and trying to run the Example, I get the following lengthy error when running run_CNN.py (relevant part bold). Any tho…