-
The Sinclair QL + Miracle Systems (Super)Gold Card combination has the ability to use ED disk drives. However, the geometry used is completely different from the IBM-PC one.
Could the following be …
-
New Gotek/FlashFloppy user here, trying to get it configured and working with a TRS-80 Model 4 using LDOS.
FlashFloppy v3.29 successfully flashed, and I can format/read/write 180K (SSDD40) and 360K…
-
Hello,
I would like to ask a question regarding read analog value.
I am using STM32F105 which pin PB10 is connected to an analog signal, and I want to monitor the value. The PB10 can be configure…
-
Greetings -
I am working on a Gotek PCB project based on the Artery AT32F415RBT, which is found on the factory Gotek SFRKC30.AT4. I want to include your "Enhanced Gotek" features in my design. Howev…
-
hey,
When inserting the USB stick after loading, the Workbench 3.2.1 can see the selected ADF and change the folder on mine
USB stick via Gotek step keys.
When I reset my Amiga, the Gotek does …
-
Is it possible to add support for stm32f105 with two cans?
-
Today I received this board, and flashed latest 3.28 firmware. Unfortunately, it doesn't seem to boot (or at least the display shows nothing at all). I opened the board and to my surprise it has an AT…
-
Hi,
yes, i know that the POG is short on resources and is no longer supported, but it still in the configuration file, and with the recent possibility to disable some digital modes I thought could …
-
Im running slcan through a custom STM32F105 board and having some issues in reading CAN messages. If I turn on fuzzing it spews messages out on the bus, but if I just turn on capturing and try to rece…
-
I am confused about the write vs read pin setup in this:
https://github.com/acemielektron/fddEMU/blame/main/README.md#L50..L51
and
https://github.com/acemielektron/fddEMU/blame/main/README.md#L69…
hachi updated
2 years ago