-
can't find setting to set preamble and sync word length
Is it possible to do this?
-
## Summary
When running [this](https://github.com/embassy-rs/embassy/blob/2c38dd17b9a5a507fc77d90d78486e4764234752/examples/rp/src/bin/lora_p2p_receive.rs#L107) example, there is a soft lock. It ca…
-
The STM32WL55 series combines an MCU with a LoRa-transceiver in a single module. I'm working together with STMicroelectronics to get some support for these chips in the Arduino ecosystem, and we're cu…
-
**Sketch that is causing the module fail**
```c++
#include
#include
static uint8_t ucBackBuffer[1024];
#define SDA_PIN 17
#define SCL_PIN 18
// Set this to -1 to disable or the GPIO…
-
Using the LoRaWAN_End_Device_Reference.ino the CubeCell 2 can initialize the Device but return error -6 most times.
In TTN I see the join process without errors.
Tried to skip the error in sketch,…
-
Hi!
I recently tried to use SF6 with station based on SX1302. There is a problem with SX1276 based devices that require implicit header mode for SF6.
SF6 and implicit header only work for LoraStd …
-
Hello everyone
I'm following this instructions in order to get started with LoraWan: https://www.waveshare.com/wiki/SX1302_LoRaWAN_Gateway_HAT#Documents
The issue is that when I try to get the g…
-
I've been trying out the LoRaWAN examples, mostly without difficulty. Great work!
However, for some purposes, I would very much like to be able to get some uplink (and maybe some downlink) properties…
-
Hello,
First of all, I would like to apologize for opening a closed issue yesterday. I am new to Lora and Lorawan environments. I have a Heltec Wifi/Lora v3 with SX1262 lora chip and using Visual …
-
I have a Heltec Wireless Stick Lite V3 board flashed with the example code. The board uses a ESP32-S3 and a SX1262 module.
The node is set up with TTN which receives the join request and also respo…